摘要
运行技术不断改进，各个液压泵试验台厂家和维修行家对于设备的要求也不断增高。用户在使用设备的时候，燃油的温度达到规定之后会自动启动主机，然后进行驱动测试，测试完毕会自行运行。
JD-YB-II工控机液压泵试验台
产品介绍：
本款液压泵试验台主要检测转向助力泵及液压齿轮泵的工作压力，流量，密封性及相关阀的密封性等各种液压转向系统故障。该机采用液压泵随时可以调节液压系统的工作状况检测元器件的各种参数。特别适应载重车辆，农用机械液压泵性能检测。
特点：
01. 工控机电脑控制。
02. 主机变频调速，输出扭矩大
03. 试验油恒温控制
技术参数：
01. 电脑显示：转速、油温、压力、流量
02. 电源：380V/50Hz
03. 油泵：380V/50Hz
04. 功率：4KW
05. 转速：0-4000r/min
06. 测量范围：0-25MPa
07. 流量检测
08. 净重：600Kg
09. 净尺寸：1600X1300X1500mm
10. 可选配置：
01. 电源：根据要求
02. 功率：根据要求.
泰安市精动实验设备有限公司-JD-YB-II工控机液压泵试验台
了解液压泵试验台的概况：
试验台是对液压机进行检测、调整和维修的设备，近几年来，随着液压机的广泛应用，运行技术不断改进，各个液压泵试验台厂家和维修行家对于设备的要求也不断增高。用户在使用设备的时候，燃油的温度达到规定之后会自动启动主机，然后进行驱动测试，测试完毕会自行运行。如果大家还想了解更多有关液压泵试验台价格或是高压试验台厂家的问题，欢迎关注泰安精动实验设备有限公司。
Jd-yb-ii industrial computer hydraulic pump test bench
Product introduction:
This hydraulic pump test-bed mainly detects various hydraulic steering system faults such as the working pressure, flow, tightness of power steering pump and hydraulic gear pump and the tightness of related valves. The machine adopts a hydraulic pump, which can adjust the working condition of the hydraulic system at any time and detect various parameters of components. It is especially suitable for testing the performance of hydraulic pumps of heavy-duty vehicles and agricultural machinery.
characteristic:
01. Industrial computer computer control.
02. The main engine is variable frequency speed regulation, and the output torque is large
03. constant temperature control of test oil
Technical parameters:
01. Computer display: speed, oil temperature, pressure, flow
02. Power supply: 380v/50hz
03. oil pump: 380v/50hz
04. power: 4kw
05. Speed: 0-4000r/min
06. Measurement range: 0-25mpa
07. Flow detection
08. Net weight: 600kg
09. Net size: 1600x1300x1500mm
10. Optional configuration:
01. power supply: as required
02. Power: as required
Tai'an Jingdong Experimental Equipment Co., Ltd. - jd-yb-ii industrial computer hydraulic pump test bench
Understand the overview of hydraulic pump test bench:
Hydraulic pump test-bed is an equipment for testing, adjusting and maintaining hydraulic press. In recent years, with the wide application of hydraulic press and the continuous improvement of operation technology, the requirements of various hydraulic pump test-bed manufacturers and maintenance experts for equipment are also increasing. When using the equipment, the user will automatically start the host after the fuel temperature reaches the specified value, and then carry out the drive test. After the test, it will run by itself. If you want to know more about the price of hydraulic pump test bench or the manufacturer of high-pressure test bench, please pay attention to Tai'an Jingdong Experimental Equipment Co., Ltd.
英文由百度翻译，仅供参考。
