摘要
下面的内容是对于油嘴校验器的事项阐述，所展示的高压共轨试验台都是现场拍摄，提供的内容都是经过高压共轨试验台厂家经验所得，请点击进入查看更多喷油泵试验台的相关行业信息吧。
油嘴校验器
油嘴校验器的使用方法：
使用检测仪前应检查是否固定牢固，工作环境应清洁，检测仪特别是装夹喷油器的接头处应擦拭干净，然后加入沉淀48小时以上的0号轻柴油，严禁使用不合格的柴油。油嘴校验器总成开启压力试验，需要将三通放在支架中间，转动支架上的螺杆，旋上高压油管,将喷油器总成固定好，检察安装的密封性后，按动压力杆进性泵油，并看压力表。
Usage of nozzle calibrator:
Before using the detector, check whether it is firmly fixed, and the working environment should be clean. The detector, especially the joint where the injector is clamped, should be wiped clean, and then add 0 light diesel oil that has been precipitated for more than 48 hours. It is strictly forbidden to use unqualified diesel oil.
For the opening pressure test of the assembly of the nozzle calibrator, place the tee in the middle of the support, rotate the screw on the support, screw on the high-pressure oil pipe, fix the injector assembly, check the tightness of the installation, press the pressure rod to pump oil, and look at the pressure gauge.
英文由百度翻译，仅供参考。
