摘要
泰安精动实验设备有限公司为大家带来关于喷油泵试验台的产品介绍,并图文并茂的给大家展示了12psb喷油泵试验台产品的使用,预知详情请点击机油泵试验台厂家的官方网站进行查询吧。
JD-I 液晶工控工作站喷油泵试验台
喷油泵试验台的产品介绍:
喷油泵试验台主机变频调速,转速任意预置,15'液晶真彩色显示,工业嵌入式计算机主板,计算机和数字表双控双显,特大数码管显示转速、计数,两侧按键,操作更方便,计算机和数字表显示转速、计数、油温、提前角度、档位。
功能介绍:
01. 测试不同转速下的各缸供油量
02. 静态检查各缸供油的时间
03. 检查调速器性能
04. 分配泵电磁阀的试验
05. 检查气动调速器性能
06. 检查增压补偿器性能
07. 检查分配泵的输油供油能力
08. 测量分配泵泵体内压
09. 检查气膜调速器负压性能
10. 进行喷油泵的密封性试验
11. 测量提前器提前角度
主要技术参数:
01.量筒:45ml量筒两套;
02.燃油箱容积:60L;
03.油温自动控制:40±2℃;
04.试验油滤油精度:5μ;
05.直流电压12V和24V;
06.供油压力:低压:0~0.4Mpa,高压:0~4Mpa;
07.泵体内压显示:0~0.16Mpa及0~1.6Mpa;
08.气压显示:正压:0~0.3Mpa负压:-0.03~0Mpa;
09.转速预置:0~4000RPM可任意预置;
10.中心高:125MM;
11.飞轮惯量:0.8KG.M2;
12.输出功率:11-55KW
泰安市精动实验设备有限公司,JD-I 液晶工控工作站喷油泵试验台
Product introduction of fuel injection pump test bench:
The main engine of the fuel injection pump test-bed is variable-frequency speed regulation, the speed is arbitrarily preset, the 15'liquid crystal true color display, the industrial embedded computer motherboard, the computer and digital meter double control and double display, the extra large digital tube displays the speed and count, and the keys on both sides are more convenient to operate. The computer and digital meter display the speed, count, oil temperature, advance angle and gear.
Function introduction:
01. Test the oil supply of each cylinder at different speeds
02. Statically check the oil supply time of each cylinder
03. Check the governor performance
04. test of distribution pump solenoid valve
05. Check the performance of pneumatic governor
06. Check the performance of boost compensator
07. Check the oil delivery capacity of the distribution pump
08. Measure the internal pressure of the distribution pump
09. Check the negative pressure performance of the air film governor
10. Conduct the sealing test of the fuel injection pump
11. Measure the advance angle of the advancer
Main technical parameters:
01. Measuring cylinder: two sets of 45ml measuring cylinders;
02. Fuel tank volume: 60L;
03. Automatic oil temperature control: 40 ± 2 ℃;
04. Oil filtering accuracy of test oil: 5 μ;
05. DC voltage 12V and 24V;
06. Oil supply pressure: low pressure: 0~0.4mpa, high pressure: 0~4mpa;
07. Pump body pressure display: 0~0.16mpa and 0~1.6mpa;
08. Air pressure display: positive pressure: 0~0.3mpa negative pressure: -0.03~0mpa;
09. Speed preset: 0~4000rpm can be preset arbitrarily;
10. Center height: 125mm;
11. Flywheel inertia: 0.8kg M2;
12. Output power: 11-55kw
Tai'an Jingdong Experimental Equipment Co., Ltd., jd-i LCD industrial control workstation fuel injection pump test bench
英文由百度翻译,仅供参考。