摘要
公司为大家带来关于轨压传感器检测仪的详细介绍，并图文并茂的给大家展示了高压共轨试验台的使用，预知详情请点击液压油泵试验台厂家的官方网站进行查询吧。
轨压传感器检测仪
液压泵试验台的使用原理：
液压泵试验台安装之后要立即启动电机，当燃油的温度达到规定的范围之后，设备就会自行启动主机，设备驱动开始喷油，燃油经过高压管道之后，喷油器就会开始喷油。当油液进入设备的测量容器之后，断油结构切断电磁阀，挡油板挡住之后开始阻断燃油下降，液压泵实验台帮助油料进入测量容器，然后轨压传感器检测仪开始测量，测量完毕就会自行停止。
转向机实验台的特点：
转向机实验台用电磁阀来控制喷油，准确度较高，喷油的过程中不会出现气泡或是液压下降，因此在设备运转的范围内，循环喷油量较为稳定，各个油缸供油得到了改善，改良了设备的振动频率，在供油的时候，转向机试验台通过公共的供油管给各个喷油嘴增加油料，并经过设备的准确计算，掌握好压力，提升了设备的各项性能，也改变了价格。
液压泵试验台的概况：
液压泵试验台由液压喷雾、电磁阀、启动器以及转速系统组成，设备量孔的大小决定了喷油量的多少。根据实验得知，设备的喷油规律在压力较小的影响下会产生波动，这与与转向机试验台的容积无关。如果大家还想了解更多有关液压试验台价格或是高压试验台厂家的问题，欢迎关注泰安精动实验设备有限公司。
Operating principle of hydraulic pump test bench:
The motor shall be started immediately after the installation of the hydraulic pump test bench. When the temperature of the fuel reaches the specified range, the equipment will start the main engine by itself, and the equipment will drive to start fuel injection. After the fuel passes through the high-pressure pipeline, the fuel injector will start fuel injection. When the oil enters the measuring container of the equipment, the oil cut-off structure cuts off the solenoid valve, and the oil baffle blocks the decline of the fuel. The hydraulic pump test bench helps the oil enter the measuring container, and then the rail pressure sensor detector starts to measure. After the measurement, it will stop automatically.
Characteristics of steering gear test bench:
The steering gear test bench uses solenoid valves to control oil injection, which has high accuracy, and there will be no bubbles or hydraulic pressure drop in the process of oil injection. Therefore, within the scope of equipment operation, the circulating oil injection quantity is relatively stable, the oil supply of each oil cylinder has been improved, and the vibration frequency of the equipment has been improved. During oil supply, the steering gear test bench adds oil to each oil nozzle through a common oil supply pipe, and the equipment accurately calculates it, Mastering the pressure has improved the performance of the equipment and changed the price.
Overview of hydraulic pump test bench:
The hydraulic pump test-bed is composed of hydraulic spray, solenoid valve, starter and speed system. The size of the measuring hole of the equipment determines the amount of fuel injection. According to the experiment, the fuel injection law of the equipment will fluctuate under the influence of small pressure, which has nothing to do with the volume of the steering gear test bench. If you want to know more about the price of hydraulic test bench or the manufacturer of high-pressure test bench, please pay attention to Tai'an Jingdong Experimental Equipment Co., Ltd.
英文由百度翻译，仅供参考。
