摘要
本文详细解决了CRS电喷试验台的问题分析，所提供的内容有不足之处，欢迎大家留言反馈，更多高压共轨试验台的施工方法我们会定期上传，欢迎关注液压泵试验台厂家官网。
CRS电喷试验台介绍
了解CRS电喷试验台的基本概况：
CRS电喷试验台的主要作用是将电喷产生的压力与喷射过程完全分开，并且通过精确控制设备管道中的油压来实现，设备的压力基本上与发动机的转速无关。设备技术的这一创新，能够将发动机模型的振动和噪音降至较低，并且进一步降低了油耗，使排放更清洁，达到节能的目的。此外，由于噪音较低，所以设备可以正常在闹市区使用，这也是广泛应用的原因之一，因此CRS电喷试验台价格不断上涨。
CRS电喷试验台的运行原理：
在运行的时候，设备的注射压力低于喷嘴系统的注射压力，通常仅为160 MPa。由于CRS电喷试验台厂家设置的压力调节范围很广，所以选择采用电喷的技术来实现，这样设备可以较好地适应各种工作条件，并且不会很难启动。此外，比起以前通过电压启动的设备来说，它的启动和运行都较为简单，几乎不会出现故障，操作简单。
CRS电喷试验台的维护方法：
设备需要定期检查管道及电源等，确保不会出现泄漏的情况，对于老化的零件要及时更换，如果使用抹布擦拭设备，需要先断掉电源。如果大家还想了解更多有关液压缸试验台价格或是12psb喷油泵试验台厂家的问题，欢迎关注泰安精动实验设备有限公司。
Understand the basic overview of CRS EFI test bench:
The main function of CRS EFI test bench is to completely separate the pressure generated by EFI from the injection process, and it is achieved by accurately controlling the oil pressure in the equipment pipeline. The pressure of the equipment is basically independent of the engine speed. This innovation in equipment technology can reduce the vibration and noise of the engine model, further reduce fuel consumption, make emissions cleaner, and achieve the purpose of energy conservation. In addition, due to the low noise, the equipment can be normally used in downtown areas, which is also one of the reasons for its wide application. Therefore, the price of CRS EFI test-bed continues to rise.
Operation principle of CRS EFI test bench:
During operation, the injection pressure of the equipment is lower than that of the nozzle system, which is usually only 160 MPa. Because the pressure regulation range set by the manufacturer of CRS EFI test bench is very wide, the technology of EFI is selected to realize it, so that the equipment can better adapt to various working conditions and will not be difficult to start. In addition, compared with the equipment started by voltage in the past, its startup and operation are relatively simple, there is almost no failure, and the operation is simple.
Maintenance method of CRS EFI test bench:
The pipeline and power supply of the equipment need to be checked regularly to ensure that there is no leakage. The aging parts should be replaced in time. If the equipment is wiped with a rag, the power supply needs to be cut off first. If you want to know more about the price of hydraulic cylinder test bench or the manufacturer of 12psb fuel injection pump test bench, please pay attention to Tai'an Jingdong Experimental Equipment Co., Ltd.
英文由百度翻译，仅供参考。
