摘要
XXX公司为大家带来关于JD-FXJ-III转矩测试方向机试验台的详细介绍，并图文并茂的给大家展示了高压共轨试验台的使用，预知详情请点击喷油泵试验台厂家的官方网站进行查询吧。
JD-FXJ-III转矩测试方向机试验台
产品介绍：
该转向机试验台是根据汽车动力转向器（俗称液压方向机）专用标准《QC/T306-1999汽车动力转向控制阀总成台架试验方法》及《QC/T529-2000汽车动力转向器总成台架试验方法》设计要求等相关标准。并依据动力转向器和转向助力泵所出现的故障而设计的，集动力转向器及转向助力泵维修、检测为一体的动力转向器综合性能检测台。该检测设备操作简单、维护方便、检测精度高。经本检测台检测的动力转向器和转向助力泵合格率达到。
特点：
该转向机试验台采用油压系统，主机变频调速，转速任意预置，数字表显示，试验油恒温控制。
主要检测方向机助力的对称度，左右扭矩，内漏，转向，单边沉重。转向助力泵的工作压力，流量，密封性及相关阀的密封性等各种液压转向系统故障。采用液压泵随时可以调节液压系统的工作状况检测元器件的各种参数。特别适应载重车辆液压转向及工作性能的检测和试验。该机采用压力仪表显示转矩、工作压力等各种参数。
调整项目：转向沉重、冲击振动、操纵不稳、转向回跳、转向噪声、油液渗漏。
技术参数：
型号
功率(Kw)
电源(V)
计算机控制
转速(r/mm)
温控系统
液压泵(MPa)
扭矩(N.m)
转向圈数
转角(oC)
FXJ-I
4
5.5
7.5380
220X
0-4000
√
0~30
0~1000
0~9999.9
<1080
FXJ-II
√
0-4000
FXJ-III
X
0-4000
泰安市精动实验设备有限公司-JD-FXJ-III转矩测试转向机试验台
Jd-fxj-iii torque testing steering machine test bench
Product introduction:
The steering gear test bench is based on the design requirements of the special standards for automotive power steering gear (commonly known as hydraulic steering gear) "qc/t306-1999 bench test method for automotive power steering control valve assembly" and "qc/t529-2000 bench test method for automotive power steering gear assembly" and other relevant standards. According to the faults of power steering gear and power steering pump, a power steering gear comprehensive performance testing platform integrating the maintenance and testing of power steering gear and power steering pump is designed. The detection equipment has the advantages of simple operation, convenient maintenance and high detection accuracy. The qualified rate of power steering gear and power steering pump tested by this test bench is up to.
characteristic:
The steering gear test-bed adopts oil pressure system, frequency conversion speed regulation of the main engine, arbitrary preset speed, digital meter display, and constant temperature control of the test oil.
It mainly detects the symmetry of steering machine power, left and right torque, internal leakage, steering, and unilateral heaviness. Various hydraulic steering system faults such as the working pressure, flow, tightness of the power steering pump and the tightness of the related valves. The working condition of the hydraulic system can be adjusted at any time by using the hydraulic pump to detect various parameters of components. It is especially suitable for the inspection and test of hydraulic steering and working performance of heavy-duty vehicles. The machine uses pressure instruments to display torque, working pressure and other parameters.
Adjustment items: heavy steering, shock vibration, unstable handling, steering rebound, steering noise, oil leakage.
英文由百度翻译，仅供参考。
