摘要
本文详细解决了JD-IV 工作站喷油泵试验台的问题分析,所提供的内容有不足之处,欢迎大家留言反馈,更多高压共轨试验台的施工方法我们会定期上传,欢迎关注液压油泵试验台厂家官网。
共轨油嘴试验台
产品介绍:
JD-IV 工作站喷油泵试验台变频调速,转速任意预置,15'液晶真彩色显示,工业嵌入式计算机主板,计算机和数字表双控双显,特大数码管显示转速、计数,两侧按键,操作更方便,计算机和数字表显示转速、计数、油温、提前角度、档位。
功能介绍:
01. 测试不同转速下的各缸供油量
02. 静态检查各缸供油的时间
03. 检查调速器性能
04. 分配泵电磁阀的试验
05. 检查气动调速器性能
06. 检查增压补偿器性能
07. 检查分配泵的输油供油能力
08. 测量分配泵泵体内压
09. 检查气膜调速器负压性能
10. 进行喷油泵的密封性试验
11. 测量提前器提前角度
主要技术参数:
01.量筒:45ml量筒两套;
02.燃油箱容积:60L;
03.油温自动控制:40±2℃;
04.试验油滤油精度:5μ;
05.直流电压12V和24V;
06.供油压力:低压:0~0.4Mpa,高压:0~4Mpa;
07.泵体内压显示:0~0.16Mpa及0~1.6Mpa;
08.气压显示:正压:0~0.3Mpa负压:-0.03~0Mpa;
09.转速预置:0~4000RPM可任意预置;
10.中心高:125MM;
11.飞轮惯量:0.8KG.M2;
12.输出功率:11-55KW
泰安市精动实验设备有限公司-JD-IV 工作站喷油泵试验台
Product introduction:
The main machine of this test-bed has variable-frequency speed regulation, arbitrary preset speed, 15'LCD true color display, industrial embedded computer motherboard, dual control and dual display of computer and digital meter, super large digital tube to display speed and count, buttons on both sides, which is more convenient to operate, and computer and digital meter to display speed, count, oil temperature, advance angle and gear.
Function introduction:
01. Test the oil supply of each cylinder at different speeds
02. Statically check the oil supply time of each cylinder
03. Check the governor performance
04. test of distribution pump solenoid valve
05. Check the performance of pneumatic governor
06. Check the performance of boost compensator
07. Check the oil delivery capacity of the distribution pump
08. Measure the internal pressure of the distribution pump
09. Check the negative pressure performance of the air film governor
10. Conduct the sealing test of the fuel injection pump
11. Measure the advance angle of the advancer
Main technical parameters:
01. Measuring cylinder: two sets of 45ml measuring cylinders;
02. Fuel tank volume: 60L;
03. Automatic oil temperature control: 40 ± 2 ℃;
04. Oil filtering accuracy of test oil: 5 μ;
05. DC voltage 12V and 24V;
06. Oil supply pressure: low pressure: 0~0.4mpa, high pressure: 0~4mpa;
07. Pump body pressure display: 0~0.16mpa and 0~1.6mpa;
08. Air pressure display: positive pressure: 0~0.3mpa negative pressure: -0.03~0mpa;
09. Speed preset: 0~4000rpm can be preset arbitrarily;
10. Center height: 125mm;
11. Flywheel inertia: 0.8kg.m2;
12. Output power: 11-55kw
Tai'an Jingdong Experimental Equipment Co., Ltd. - jd-iv workstation fuel injection pump test bench
英文由百度翻译,仅供参考。