摘要
TLD-GT通用试验台为大家带来关于TLD-GT通用试验台的详细介绍,并图文并茂的给大家展示了高压共轨试验台的使用,预知详情请点击喷油泵试验台厂家的官方网站进行查询吧。
液压泵试验台
产品介绍:
本共轨系统主机传动采用变频无级调速;集喷油泵试验台的完善技术和新型共轨的结合,既可以检测普通的机械式喷油泵,TLD-GT通用试验台也可以实现共轨油泵、共轨喷油器的检测。通过CRS控制系统用户可以设定控制参数,CRS试验台模拟ECU输出燃油喷射控制信号,驱动共轨高压泵和喷油器协同工作。本控制系统的喷油器驱动信号脉宽及频率可调;短路保护功能;可以实时测量轨道压力,并具有高压保护功能。
可测试BOSCH CP1,CP1-H,CPI-K,CP2,CP3,DELPHI, BOSCH、SIEMENS、DELPHI、DENSO等高压共轨喷油泵,BOSCH(博士),DELPHI(德尔福),SIEMENS(西门子),DENSO(电装另选)等高压共轨喷油器。
特点:
01、多段电压输出自动控制,满足不同共轨喷油器的驱动要求
02、LCD液晶显示高压共轨喷油器喷射频率,驱动脉宽自动控制
03、自动控制待试喷油泵的流量调节阀,控制待试喷油泵的流量
04、TLD-GT通用试验台自动实现油轨压力、精度高达到±1MPa
05、开环或闭环控制方式手动可选
功能介绍:
01. 测试不同转速下的各缸供油量
02. 静态检查各缸供油的时间
03. 检查调速器性能
04. 分配泵电磁阀的试验
05. 检查气动调速器性能
06. 检查增压补偿器性能
07. 检查分配泵的输油供油能力
08. 测量分配泵泵体内压
09. 检查气膜调速器负压性能
10. 进行喷油泵的密封性试验
11. 测量提前器提前角度
12. 测量高压共轨喷油器的油量;
13. 测量高压共轨喷油器的启动油量;
14. 测量高压共轨喷油器的回油量;
15. 测试轨道压力
16. 测试共轨喷油器的喷油压力
17. 测试共轨喷油器的喷雾锥角
18. 测试共轨喷油器的喷雾均匀性
19. 测试共轨油泵的密封性
20. 测试共轨油泵的供油压力
21. 测试共轨油泵的回油量
泰安市精动实验设备有限公司,TLD-GT通用试验台
Product introduction:
The main engine of the common rail system test-bed adopts frequency conversion stepless speed regulation; With the combination of the perfect technology of the fuel injection pump test bench and the new common rail, the common mechanical fuel injection pump can be tested, and the tld-gt general test bench can also test the common rail fuel pump and common rail fuel injector. Through the CRS control system, users can set control parameters, and the CRS test bench simulates ECU to output fuel injection control signals to drive the common rail high-pressure pump and injector to work together. The pulse width and frequency of the fuel injector driving signal of this control system are adjustable; Short circuit protection function; It can measure the track pressure in real time and has the function of high-voltage protection.
It can test Bosch CP1, cp1-h, cpi-k, CP2, CP3, Delphi, Bosch, Siemens, Delphi, Denso and other high-pressure common rail fuel injection pumps, Bosch (Doctor), Delphi (Delphi), Siemens (Siemens), Denso (electrical installation is optional) and other high-pressure common rail fuel injectors.
characteristic:
01. Automatic control of multi-stage voltage output to meet the driving requirements of different common rail injectors
02. LCD liquid crystal displays the injection frequency of high-pressure common rail injector, and the driving pulse width is automatically controlled
03. Automatically control the flow regulating valve of the fuel injection pump to be tested to control the flow of the fuel injection pump to be tested
04. Tld-gt universal test bench automatically realizes rail pressure with high accuracy of ± 1MPa
05. Open loop or closed loop control mode can be manually selected
Function introduction:
01. Test the oil supply of each cylinder at different speeds
02. Statically check the oil supply time of each cylinder
03. Check the governor performance
04. test of distribution pump solenoid valve
05. Check the performance of pneumatic governor
06. Check the performance of boost compensator
07. Check the oil delivery capacity of the distribution pump
08. Measure the internal pressure of the distribution pump
09. Check the negative pressure performance of the air film governor
10. Conduct the sealing test of the fuel injection pump
11. Measure the advance angle of the advancer
12. Measure the fuel quantity of high-pressure common rail injector;
13. Measure the starting oil volume of high-pressure common rail injector;
14. Measure the return oil volume of high-pressure common rail injector;
15. Test track pressure
16. Test the injection pressure of common rail injector
17. Test the spray cone angle of common rail injector
18. Test the spray uniformity of common rail injector
19. Test the sealing of common rail oil pump
20. Test the oil supply pressure of common rail oil pump
21. Test the return oil volume of common rail oil pump
Tai'an Jingdong Experimental Equipment Co., Ltd., tld-gt general test bench
英文由百度翻译,仅供参考。